If you are trying to connect to WIFI but get the following error "The device associated with this request is not powered", then the WiFi function needs to be activated on the device.
Press the Red X and number 3 keys together
Select Com control
Select WiFi, then Start network interface
Press OK when No profile present
Then press Exit, and the Paymark option
Connecting to WiFi network
Press #, enter 999
Scroll down to the Utility section, then Comms Setup
Select Comms settings, Wi-Fi, Setup, DHCP
Press the green tick to navigate through four screens, select the WiFi network you need, then enter the password in the "Comms settings Pre-shared Key".